Without Borders by Pamela Mauseth
Can you hear the call of the wild? Can you imagine shedding civilization’s shackles and unleashing your inner beast? Now howl, run and be free, just don’t forget to put on your clothes before you leave the house.
PROs: Mosaic design composed of vitreous glass that is guaranteed to transform your space. Mosaicist: Pamela Mauseth
CONs: Not recommended for people suffering from lycanthropy.
|Size||63 W x H 22 inch (160 W x H 56 cm)|
|Backing||Crafted on Wedi board|
|Suggested Uses||This stunning mosaic design is perfect for your office, bedroom, living room or entrance. Our mosaics are made from natural materials, naturally resistant to different environments (dry, moist or wet) and weather conditions (frost, sunlight or extreme heat).|
|Free Shipping||(3 - 5 weeks) $0.00|
|Expedite Shipping||(2 - 3 weeks) $36|
You are 6 simple steps away to completely transforming your space:
Step 1. Gently open your package and unravel your mosaic. The mosaic is mounted on a fiber mesh backing and wrapped with a protective film from the reverse. Gently remove the protective film without damaging the mesh and remove any excess glue. Should individual stones have become loose during shipment, glue them back using a solvent-based adhesive.
Step 2. Using your trowel, spread a thin layer of adhesive or white thin-set mortar across the surface you wish to tile. If you’re placing your mosaic on a vertical wall or ceiling, you can always glue it to a wooden board and secure the board to the wall. In the case of large wall installations, nailing little nails into the gaps between the stones for a stronger seal is recommended. If the mosaic is to be laid in a humid or wet room, the laying area must be made waterproof. A special sealing adhesive should be used.
Step 3. Gently place the mosaic and use the flat end of the grout float to ensure the mosaic is perfectly flat and well adhered to the surface. Remove any excess of mortar with a damp cloth.
Step 4. Wait for at least 24hrs for the mortar to dry out. Once the mortar is dry, moisten the tiles using a damp sponge, spread your desired grout to fill the spaces between tiles using your grout float. Wipe down any excess grout, first with a dry towel, then a wet one. (Before applying the grout, make sure to glue back in place any fallen stone using a solvent-based adhesive)
Step 5. Once dry (will take approximately 24hrs), apply a marble and stone sealer.
Step 6. Take a step back and admire the space you’ve just transformed.
If you have any questions, we’re happy to help. Just email us at [email protected] or chat us up.
Disclaimer: No warranty is implied by these instructions. Use at your own risk. Please wear goggles when cutting mosaic materials or mixing grout. Mosaic materials are often sharp. Keep out of reach of children.
Your mosaic has its very own fingerprint
Just like your fingertips, your mosaic will be unique in the world. There are two reasons for this:
1. Nothing’s set in stone. Yet. Before you buy, you can customize: For any surface: Turn it into a floor inlay or rug, wall decoration, backsplash, countertop or tabletop. For any space: Make it sparkle indoors or outlast sun, snow and cannonball splashes outdoors. For any style: Change the size, natural stone type and color.
2. All mosaics are not created equal. Each one is made of natural stones, hand-cut by our artists. This means that while your art will look like the image above, we can’t guarantee an exact replica. Your masterpiece will have slight variations in color and cut of the tiles that will make it truly one of a kind.
If you have any questions, we’re happy to help. Just email us at [email protected] or chat us up on live chat.