Butterflies Marble Mosaic – Garden-Inspired Wall Art

You are 6 simple steps away to completely transforming your space:

Step 1. Gently open your package and unravel your mosaic. The mosaic is mounted on a fiber mesh backing and wrapped with a protective film from the reverse. Gently remove the protective film without damaging the mesh and remove any excess glue. Should individual stones have become loose during shipment, glue them back using a solvent-based adhesive.

Step 2. Using your trowel, spread a thin layer of adhesive or white thin-set mortar across the surface you wish to tile. If you’re placing your mosaic on a vertical wall or ceiling, you can always glue it to a wooden board and secure the board to the wall. In the case of large wall installations, nailing little nails into the gaps between the stones for a stronger seal is recommended. If the mosaic is to be laid in a humid or wet room, the laying area must be made waterproof. A special sealing adhesive should be used.

Step 3. Gently place the mosaic and use the flat end of the grout float to ensure the mosaic is perfectly flat and well adhered to the surface. Remove any excess of mortar with a damp cloth.

Step 4. Wait for at least 24 hours for the mortar to dry out. Once the mortar is dry, moisten the tiles using a damp sponge, spread your desired grout to fill the spaces between tiles using your grout float. Wipe down any excess grout, first with a dry towel, then a wet one. (Before applying the grout, make sure to glue back in place any fallen stone using a solvent-based adhesive)

Step 5. Once dry (will take approximately 24 hours), apply a marble and stone sealer.

Step 6. Take a step back and admire the space you’ve just transformed.

If you have any questions, we’re happy to help. Just email us at [email protected] or chat us up. You can also click on our Mosaic Installation Guide for additional information.

Disclaimer: No warranty is implied by these instructions. Use at your own risk. Please wear goggles when cutting mosaic materials or mixing grout. Mosaic materials are often sharp. Keep out of reach of children.

Your mosaic has its very own fingerprint

Just like your fingertips, your mosaic will be unique in the world. There are two reasons for this:

1. Nothing’s set in stone. Yet. Before you buy, you can customize: For any surface: Turn it into a floor inlay or rug, wall decoration, backsplash, countertop or tabletop. For any space: Make it sparkle indoors or outlast sun, snow and cannonball splashes outdoors. For any style: Change the size, natural stone type and color.

2. All mosaics are not created equal.
 Each one is made of natural stones, hand-cut by our artists. This means that while your art will look like the image above, we can’t guarantee an exact replica. Your masterpiece will have slight variations in color and cut of the tiles that will make it truly one of a kind.

FAQ

Q) What materials is the Butterflies In The Garden mosaic made from?
A) The artwork is made from premium marble tiles and crafted on a mesh support.

Q) Is the butterfly mosaic handmade?
A) Yes. Each mosaic is handmade, with natural stones hand-cut by our artists. Slight variations in color and cut are part of the handcrafted character of the artwork.

Q) What is the standard size of the artwork?
A) The standard size is 47 W x 53 H inches (119 W x 135 H cm).

Q) Can the artwork be customized?
A) We can fully customize this piece to perfectly match your space and style.
Custom Sizes: Fit it to any wall or floor dimensions.
Custom Design: Tell us exactly what you’d like to change.
Custom Colors: Adjust the palette to match your existing decor.
Custom Shapes: Choose from geometric, curved, or irregular layouts.
Premium Materials: Select either elegant marble or vibrant glass tiles (Smalti).

Q) Where can this marble mosaic be displayed?
A) perfect spaces include offices, bedrooms, and living rooms. It can also be made for floor inlays, wall decoration, backsplashes, countertops, or tabletops.

Q) How should the mosaic be installed and cared for?
A) The mosaic is mounted on a fiber mesh backing and can be installed with adhesive or white thin-set mortar. After the mortar and grout have dried, a marble and stone sealer is applied. Wet or humid installation areas must be waterproofed.

Q) Need More Details?
A) For a comprehensive step-by-step walkthrough, view our official Mosaics Lab Installation Guide.


Have a question about your project? We are always here to help! Reach out directly to our friendly customer care team at [email protected] .

If you have any questions, we’re happy to help. Just email us at [email protected] or chat us up on live chat.